Here is my take of a Raspberry Pi Zero W with a uFL connector added to it. This allows you to have an external antenna for added range. It was difficult but fairly easy with the right tools and good eyes. With just a hot air rework station on high heat...

Mesh-Pi you ask? So to start I am a ham radio operator in ARES (Amateur Radio Emergency Service). I have been testing HSMM-MESH version 1.0.0. I must say with my back ground as a former WISP owner for 8 years I have been having a lot of fun. I have ...

This project started with a location that needed headphone audio at a desk. We had an extra cat 5 running to the desk from our audio rack in the other room. So I started out by making these RJ-45 to 1/8 inch headphone jacks. They worked but the audio...

This is an update to my "iPhone charger " using the same 7 port USB hub. The reason for the update was... I noticed when I plugged my Android into the "iPhone charger " it would charge faster thinking it was plugged into an AC charger not just USB cha...

A friend of mine has a camera dolly that he made, but wanted it remote controlled so i took a microcontroller, some other electronic parts, a broken servo and a old DVD players IR remote (DVD player quit working). Parts Used : Teensy USB 2.0  ...

Updated: Powered USB hub mod This is what I made to charge my iPhone from a 7 port USB hub in my work van. A big thanks to http://www.ladyada.net/make/mintyboost/icharge.html

Modifided an old ATM safe to have a RFID lock. Parts Used : RFID Side: Parallax BASIC Stamp 2SX OEM Module Kit (IC1) Parallax RFID Reader Serial Parallax RFID Card Small RFID Glass Ampule from www.trossenrobotics.com TIP31 NPN...

This is a double detect kit for ATM dispenser.

This is my king cobra bracelet I made.